Login to enhance your online experience. Login or Create an Account
Shopping Cart

Shopping Cart 0 Items (Empty)




The Kawasaki Ninja ZX-14 (ZZR1400 in a few markets, ZX-14R since 2012), is a bike when you look at the Ninja athletics bicycle show from Japanese maker Kawasaki that has been their most effective recreation cycle at the time of 2007. It was introduced during the 2005 Tokyo engine tv show and revealed when it comes to 2006 design seasons as an alternative when it comes to ZX-12R. The ZZR1400 is capable of accelerating from 0--60 miles per hour in 2.5 moments. The most notable speeds is electronically limited to 186 miles per hour (299 km/h) as a result of an agreement amongst the biggest Japanese and European bike producers.

The bike was in season 10 of Fifth Gear on October 30, 2006.

Bike USA road tested the bicycle with its October 10, 2006 issue and uploaded listed here inventory results:

60 ft.: 1.713 moments
330 ft.: 4.349 seconds
1/8 mile: 6.447 moments, attaining 117.39 mph
1/4 mile: 9.783 moments, achieving 147.04 miles per hour

2008 spotted a inform. The launch associated with the 2012 ZX-14R spotted a second-generation revision alongside obtaining roentgen designation. A displacement increase which produced additional horsepower, with three variable power settings and KTRC. Kawasaki traction controls and ignition-management program which was lifted from the ZX-10R. Additionally with cosmetic changes and progressive framework improvements and suspension system revised internals. There was furthermore a slipper clutch added the very first time. The motor gets cylinder heads with polished harbors and webcams with an increase of lift and longer period. Piston is light with additional compression that see cooled by a brand new oils jet program. More powerful connecting rods and crankshaft as well as a stronger tensioner and cam sequence. whilst transmission gets heat-treated exterior gears. In addition in order to make the motorcycle run colder, therefore be more durable, they included a moment radiator lover. Larger mind pipes and bigger mufflers with a less limiting air filter all better response. Engine cyclist taped Rickey Gadson's quarter-mile time of 9.64 seconds at 149.83 miles per hour from a bone-stock bicycle, on a 50-degree day, at an altitude of 2100 legs. Pattern world recorded a quarter-mile time that produced accurate documentation 9.47-second (corrected) at 152.83 mph, and also struck 60 mph within 2.6 sec.

The Kawasaki Ninja ZX-11 (or ZZ-R1100) is a motorcycle that was produced from 1990 to 2001. It absolutely was sold while the ZX-11 Ninja in united states together with ZZ-R1100 when you look at the remaining portion of the globe. The C-model went from 1990 to 1993 although the D-model ran from 1993 to 2001. The ZX-10 had been the forerunner regarding the ZX-11 Ninja.
Competition for quickest production bike

With accurate documentation top speeds of 169--176 miles per hour (272--283 km/h) the ZX-11 had been the quickest manufacturing motorcycle for six years, from its introduction in 1990 through 1995, with regards to ended up being exceeded by the 1996 Honda CBR1100XX. When the cycle is introduced in 1990, the nearest manufacturing bicycle top speed is 16 km/h (9.9 mph) slow and it belonged on ZX-10, the cycle that Kawasaki was replacing using ZX-11. The ZX-11 also have a ram environment induction program. The 1990 ZX-11 C1 design got a Ram-air intake the first on any production bike. The 1997 ZX-11's quarter-mile time was 10.43 moments at 131.39 mph (211.45 km/h).

In 2000 the Kawasaki Ninja ZX-12R ended up being launched. The ZX-12 is built to be more of a pure sportbike. It absolutely was a great deal predicted considering that the Suzuki GSX1300R Hayabusa presented the subject for quickest manufacturing bike when it had been launched in 1999. European governments threatened to ban high-speed motorbikes, leading Kawasaki to de-tune the ZX-12R just before its release. Beginning at the extremely end of 1999, a gentlemen's contract between larger European and Japanese manufacturers has actually limited manufacturing bike top rates to 300 km/h (186 mph),

In 2002 the Kawasaki ZZ-R1200 was launched, which will be a sport tourer and much more akin to the ZX-11.

The Ninja ZX-10 (also called ZX-10 "Tomcat") had been a hobby motorcycle produced by Kawasaki motorbikes between 1988 and 1990, the main Kawasaki Ninja line. With a premier speeds of 165 miles per hour (266 km/h), it absolutely was the quickest manufacturing motorcycle in 1988.

The ZX-10 changed the GPZ1000RX once the flagship sportbike from Kawasaki.

The motor ended up being designed after its predecessor's, with the same displacement but 36 mm semi-downdraft CV carburetors and a narrower valve position. System internals were altered: Compression ratio was raised to 11.0:1; less heavy pistons and bigger valves were used.

They had Kawasaki's earliest aluminum border frame, a design which has since become standard.

Aerodynamics had been advertised is much better than the outgoing model's.

Kawasaki created the design in reaction to Honda's introduction associated with the CBR900RR Fireblade when it comes to 1992 design season. Ahead of the introduction of this Fireblade, large-capacity Japanese sports motorbikes had come to be polarised. On a single part had been the 750 cc sport bikes, impacted by stamina rushing together with World Superbike tournament. On the other, the "big-bore" 1,000 cc-plus sports-tourers have get to be the natural evolution regarding the performance bicycles of preceding 20 years. Basically, the 750s have the maneuvering, the big-bores had the energy. In both categories, Kawasaki ruled. The ZXR750 offered the technology together with efficiency of ultra-expensive racing-homologation systems from Honda and Yamaha at half the cost, and it also outclassed the similarly priced GSX-R750 of that time period, which nevertheless featured a perimeter frame and an oil-cooled engine, whilst the ZZ-R1100 held the subject for the quickest manufacturing motorcycle on Earth.

The Fireblade packaged a 900 cc system into a 750 cc sport cycle chassis. It combined big-bore energy with athletics bicycle managing, but, crucially, it also pioneered careful focus on weight-saving design. The Fireblade not merely outpowered the 750's, it had been in addition substantially less heavy. This is the information overlooked or underappreciated by Kawasaki once they attempted to create their particular Fireblade-beater. In creating the first ZX-9R, Kawasaki blended their class-leading big-bore, the ZZR1100, with their class-leading 750, the ZXR750, as opposed to invest in a completely brand new build.

The result was a big bike; despite weight-saving steps like magnesium system protects, its quoted dried out fat was 215 kg (474 pound), virtually 30 kg (66 pound) heavier as compared to Fireblade. It made around 125 hp (93 kW) during the backside wheel from the dyno, between 10 and 15 hp (11 kW) above the Fireblade, but this benefit in power could not make up for their dimensions, pounds and reduced agility. Instead of feel a direct competitor, the ZX-9R ended up being retained as a far more stable and much more comfortable alternative to the Honda, with additional straight-line speed. The road-going prejudice is clear through the increased clipons and much more upright sitting opportunities.
Design background
ZX900B (1994)
ZX-9R model 1994

The initial ZX-9R could possibly be seen as a ZXR750 incorporating some ZZ-R1100 build qualities. The wheels - three-spoke cast aluminum alloy 3.5-inch x 17-inch front and 5.5-inch x 17-inch back -, leading forks - completely flexible 43 mm upside-down KYB - and unbraced fabricated aluminum box-section swingarm with completely adjustable remote-reservoir KYB monoshock had been direct carry-overs from the ZXR. The twin-piston rear Tokico caliper no more installed via a torque arm, and also the clip-on handlebars installed above the top triple clamp, not here. The four-piston Tokico front side calipers and 320 mm front disks are common toward ZZ-R therefore the ZXR.

The framework is a welded aluminium-alloy dual-beam with cast steering mind and swingarm endplates, however with steel-tube motor cradles and swingarm-mount endplates expanding returning to support the driver's seat and connect the bolt-on subframe, like ZZ-R1100.

The motor displacement was 899 cc. The crankcases, clutch and gearbox were held over through the ZXR750, with a longer-throw crank and a bigger-bore, taller cylinder block for the larger capability. The cylinder mind had been externally very just like the ZXR, as well, but incorporated rocker valve actuation just like the ZZ-R1100 as opposed to the ZXR's direct actuation. Redline ended up being 12,000 rpm resistant to the Fireblades 10,500 rpm. Induction ended up being by 40 mm Keihin CVKD carburettors, together with motor breathed through a 10-litre airbox fed by twin ram-air intakes regarding the nostrils of bike, beneath the solitary headlight, via ducts driving back and across framework beams close to the steering mind, like regarding the ZZ-R.
ZX900B3 (1996) and ZX900B4 (1997)

Detail modifications. Power enhanced from 139 to 141 hp (105 kW). The trunk suspension linkage and back spring speed are replaced, improving maneuvering. Pillion grab rails had been added, the gearboxes are made stronger, and new six-piston Tokico front side calipers changed the prior design's four-piston devices. The extra weight of the cycle increased to 241.7 kg (533 pound).
ZX900C1 (1998) and ZX900C2 (1999)

Motor bore, swing and redline stayed unchanged; the rest had been new. The clutch had been changed from hydraulic to cable-operated. The generator had been relocated from behind the cylinder into most old-fashioned venue on left end associated with the crank. There was clearly now no balance shaft. The valvetrain switched to direct valve actuation, in addition to cylinder head had been plumbed for then-new plug-top ignition coils, replacing more standard remote coils and high-tension guides. Particularly, the brand new motor furthermore showcased a Hall-type cam place sensor on fatigue camshaft. Cam position detectors are generally used in conjunction with electronic fuel injections. Because the ZX900C showcased induction by Keihin 40 mm CVKD carburettors, a cam place sensor wasn't needed. Its inclusion could show that Kawasaki had styles to add gasoline shot in the motor in the foreseeable future. This first occurred regarding 2000 ZX-12R Kawasaki's very first fuel-injected recreation cycle since the 1981--1985 GPZ1100.But this didn't happen on this engine before the 2003 introduction associated with the Z1000, which uses a bored-out ex-ZX-9R engine.

The frame destroyed the metal motor cradles, but additionally their bolt-on subframe plus the rear ride level adjuster. The swingarm was a unique unbraced, rectangular-section extruded build. The wheel sizes had been equivalent, nevertheless the rims were a brand new, less heavy build. The braking system calipers held more than, however the disks were smaller and light without preventing energy being affected. The trunk surprise absorber changed from a remote-reservoir to a lighter, scaled-down piggyback build. The wheelbase dropped 30 mm to 1,410 mm (56 in).

Unique 46 mm right-way-up KYB forks changed the heavy, though stiffer 43 mm upside-down forks from the B model. The leading forks were criticised by some european testers for fluttering during hard-driving, a phenomenon that was best solved because of the 2002 model.

Overall, with a factory-quoted dry fat of 183 kg (403 pound), the C-model considered less fully fuelled versus very first B-model weighed dried out.

Aesthetically, the newest bicycle retained the rounded appearance of their forerunner, but became sleeker, with a thinner tail unit and an inferior fairing. As a consequence of small motor and shorter wheelbase, however, the gasoline tank became broader and intruded more about the driving place than before.

The 1998 ZX9r C1 ran a tested (9.99 @ 138mph) quarter mile time, in a more evaluation the 1998 ZX9r C1 ran a tested (10.28 @ 135.32mph) quarter mile time.
ZX900E1 (2000) and ZX900E2 (2001)

a remarkable new look had been introduced the 2000 design, with distinctive twin headlights and another ram-air intake replacing the single headlight and integrated intake regarding the C-model. The engine gained some horse power from somewhat faster size CVRD 40 mm carburettors, a compression ratio boost from less length of time intake cam, which enhanced cranking compression. Further progress were directed mainly at dealing with.

The frame was made stiffer through the enlarging associated with forward system installing bolts, though this quit the ZX-9R in just a single front system mount on either side of the framework. More, the plastic bushings inside top back engine mount were altered to alloy. This blended to really make the motor's share into the tightness of the frame/engine device better.

The swingarm pivot and wheel spindles are made bigger in diameter, once again for more tightness. Increased counterbalance in the triple clamps paid down the path in the front-wheel to make the steering most agile. The forks are shortened to save pounds, plus the back surprise top mount ended up being redesigned to include a ride-height adjuster.
ZX900F1 (2002) and ZX900F2 (2003)

Adjustment toward 2002--2003 ZX-9R included a end fairing, just one piece front mudguard, the increased loss of the passenger get handles plus the B/C/E model H-bar mirror bracket. Technical improvements included a top braced swingarm (advertised 20% more powerful) and rear surprise with a side facing fluid reservoir, stiffened frame with relocated solid engine mounts, enhanced trail and reduced hand offset, and brand new Nissin four-piston caliper brakes and 320 mm discs at the front wheel. Minor motor changes included a return toward B/C design design Keihin CVKD carburettor and a 10% heavy crankshaft offset by a low diameter flywheel reported to aid the engine spin up faster, improving reasonable and mid-range torque.

Though slight, Ca (U.S.) particular designs included catalytic converters and carburettors with electronic fuel stop solenoids. In 2004 the ZX-9R is replaced using ZX-10R.

The Kawasaki Ninja ZX-7R ended up being a motorcycle within the Ninja sport cycle sets through the Japanese producer Kawasaki produced from 1992 until 2003. It changed the more race-oriented ZXR750 into the 750cc supersports class. They remained mainly unchanged through its manufacturing.

Between 1990 and 1995 in the usa market the ZXR-750 and ZXR-750R are called ZX-7 and ZX-7R correspondingly. Beginning with 1996 Kawasaki fallen the ZXR title following the ZX-7R around the globe.

The ZX-7R was raced, gaining 12 AMA superbike championship victories. Kawasaki's Road Racing employees riders were Eric Bostrom, Doug Chandler and Scott Russell. Doug Toland won the 1993 stamina FIM globe tournament. Andreas Hofmann claimed the 1997 Macau Grand Prix.

The ZX-7R features a 749 cc in-line four-cylinder, four-stroke system.

The framework used on the ZX-7R try a lightweight aluminum twin-spar items, designed using computer-aided build to optimize energy. The trunk subframe had been built using metal and aluminum, providing enough power for a pillion traveler whilst keeping fat to the absolute minimum.

The swingarm made use of mainly equivalent fabrication ways to produce a hollow cast and squeezed aluminum alloy hybrid swingarm, together with Uni-Trak back suspension system features a predominantly lightweight alloy and aluminum construction. The Uni-Trak program is made to supply a progressively stiffer damping and springtime speed under compression. The trunk suspension unit was completely flexible in terms of damping, preload and compression.

Leading suspension system located on the ZX-7R comprises a fully flexible 43 mm inverted cartridge hand.

Front brake system become 320 mm semi-floating front discs and Tokico six-piston calipers. Back brake system function a 230 mm disk with a twin-piston opposed caliper.

The ZX-7RR varies from path design with an adjustable head-stock direction, move supply pivot, extra increasing adjustability on front and rear suspension system, a solo cowl with a slightly various subframe, and 41 mm flat-slide carburetors. In addition it features a detailed proportion gear-box installed as traditional and Nissin front brake calipers.

Period globe got a tested 1/4 mile time of 10.82 seconds at 129.68 miles per hour (208.70 km/h).

Kawasaki Ninja - Wikipedia

The Kawasaki Ninja is the trademarked name of several series of Kawasaki sport bikes, that started with the 1984 GPZ900R

Kawasaki - Official Site

Official website of Kawasaki Motors Corp., U.S.A., distributor of powersports vehicles including motorcycles, ATVs, Side x Sides and personal watercraft.

Kawasaki Ninja | eBay

Find great deals on eBay for Kawasaki Ninja in Ninja. Shop with confidence.

2017 NINJA H2™R Ninja H2™R / H2™ Motorcycle by Kawasaki

Official info for the 2017 NINJA H2™R - specs, photos, videos, brochure & reviews. Find dealer inventory, schedule a test ride & get a quote.

Kawasaki Ninja | eBay

Find great deals on eBay for Kawasaki Ninja and kawasaki ninja 250. Shop with confidence.

Kawasaki Ninja @ Top Speed

wide range of information on kawasaki ninja: 104 news and reviews articles, 1150 pictures, 56 videos and more by Top Speed

Kryptronic Internet Software Solutions